- A WEMScontroller3.
- Run The Channel Setup Wizard To Configure The Analogue Output.
- A WEMScontroller4.
- Run The Channel Setup Wizard To Configure Relays.
- Run The VT Circuit Discover Wizard.
- Configure The VT Circuit Control Points.
- Assign A Schedule To The VT.
This guide covers the first-time setup of a VT Circuit, and assumes that a WEMScontroller3 has already been through and had its analogue output configured.
Run the Auto Discover Wizard ( | ) to detect a WEMScontroller4.
- From the Floorplan, go to | .
- Click to begin the Auto Discover Wizard.
Auto Discover Wizard
- We now have 60 seconds to press the button on the WEMScontroller4.
Press the button within 60 seconds
- The WEMScontroller4 will be discovered. Click .
The WEMScontroller4 has been discovered
- The WEMScontroller4 will be configured. Click .
The WEMScontroller4 has been configured
- Give the WEMScontroller4 an asset name, and then click .
Enter an Asset Name for the device
- Choose a room for the WEMScontroller4, and then click .
All rooms from the Floorplan will be available
The discovery process is now complete. The following options will now be shown:
- : used for setting up an FP AHU. This button will automatically assign the Cooling Unit Objects to this WEMScontroller4.
- : used for setting up an FP AHU. This button will automatically assign the preset Fresh Air Unit Objects to this WEMScontroller4.
- : used to run the Channel Setup Wizard
- : used to discover further devices
Choose to run , to run the Channel Setup Wizard, to discover another device, or to exit
Next Step
The of the WEMScontroller4 is now complete.
The next step is to run the Channel Setup Wizard in order to Configure The Relays.