Open topic with navigation

You are here: Using The System > FanCoil > FanCoil First-time Setup > 2. Channel Setup: Outputs

Configure Analogue Outputs

  1. Auto Discover WEMScontroller3.
  2. Run Channel Setup Wizard To Configure Analogue Inputs.
  3. Run FanCoil Discover Wizard.
  4. Configure FanCoil Control Points.
  5. Assign A Schedule To The FanCoil.

This guide covers the first-time setup of a FanCoil, and assumes that a WEMScontroller3 has already been through Auto Discover.

  1. Select the channel type as Analogue Out and select channel 1, then click Next.

First-time setup

  1. Set the category to Temperature, and then click Next.

First-time setup

  1. Set the Object type as AHU Supply Fan, and then click Next.

The AHU Supply Fan is the only absolute requirement in setting up a FanCoil, but we would normally expect also to configure AHU Heating Stages.

First-time setup

  1. Choose a location for the AHU Supply Fan, and then click Next.

First-time setup

  1. Click Next to the confirmation message.

First-time setup

  1. Click Next to begin configuring the next channel.

First-time setup

  1. Select the channel type as Analogue Out and select channel 2, then click Next.

First-time setup

  1. Set the category to Temperature, and then click Next.

First-time setup

  1. Set the Object type to AHU Heating Stages.

First-time setup

  1. Choose a location for the AHU Heating Stages, confirm and then click Next.

First-time setup

  1. Click Next to the confirmation message.

First-time setup

  1. There are no further outputs to set up, so click Finish to exit the wizard.

First-time setup

Next Step

The analogue outputs have now been configured.

The next step is to continue using the Channel Setup Wizard to Configure The Analogue Inputs.

WEMS User Guide version 4.0 20150130.
This guide relates to features up to and including 1.18.0.3