- WEMScontroller3 (see below).
- Run Channel Setup Wizard To Configure Analogue Input.
- Configure Fuel Tank Control Points.
The following steps define how to set up a Fuel Tank for the first time. If you would like to amend the settings of an Fuel Tank that has already been configured, see the Fuel Tank Configuration guide.
To set up a Fuel Tank for the first time, begin by discovering and configuring a WEMScontroller3, using the Auto Discover Wizard and Channel Setup Wizard. One WEMScontroller3 is needed per Fuel Tank.
Additional Components
- Required: Pressure Transducer (a third-party device that measures the liquid in the tank).
- Optional: WEMScontroller1 or WEMScontroller4 (supports the engine start/stop relay and digital inputs).
WEMScontroller3
Begin by running the Auto Discover Wizard ( | ) and detecting the WEMScontroller3. For more detailed information on how to run this wizard, see the Auto Discover section.
- Click to begin the wizard.
- Press the button on the WEMScontroller3 in order to discover the device.
- The device will be discovered. Click to continue.
- The device will be configured by the wizard. Click to continue.
- Give the device a meaningful name, and then click to continue.
- Specify a location for the device, and then click to continue.
- Click to begin the Channel Setup Wizard.
Next Step
The of the WEMScontroller3 is now complete.
The next step is to run the Channel Setup Wizard in order to Configure The Analogue Input.