Open topic with navigation

You are here: Using The System > Layers > Modules Layer > Analog Channel

Analog Channel

The Analog Channel screen can be reached as follows:

  1. From the Floorplan, go to the Modules Layer.
  2. Click on a device that supports analog channels.
  3. Click Show Channels.
  4. Click the Analog row.

Any channels that have been configured via the Channel Setup Wizard will be shown in the Analog Channels table. Click any item in the table to view more information in the Analog Settings section.

An example is shown below.

Analog Channels

Analog Channels

The Analog Settings section displays the following information:

Seq ID The unique ID of the channel in the database
Device ID The ID of the selected device
Channel Ref The number of the selected channel
Auto TX Tickbox toggles on/off
Average The number of samples the channel will take an average reading from before producing the value. With every new reading, the oldest one is dropped and a new median value calculated
Sample Rate Measured in seconds, setting can be changed up and down
Transmit Hysteresis Measured in degrees, setting can be changed up and down

Click Update to apply any changes to the settings.

To return to the default view of the Modules Layer, click Show Layout button.

To view other channel types, see Show Channels.

WEMS User Guide version 4.0 20150130.
This guide relates to features up to and including 1.18.0.3