You are here: Products > Product Information > ASD07N4 - WEMScontroller4

ASD07N4 - WEMScontroller4

Controller

Schematic

Measurements

Product Description

The WEMScontroller4 is an intelligent wireless Input/Output module for WEMS International's wireless building energy management system providing 4 relay outputs, 6 digital inputs and 2 temperature/light sensor inputs.

For product operation and installation information, please refer to the WEMScontroller4 user manual.

Features High performance wireless narrow band operation
Up to 2km line-of-sight range
Multi-hop wireless protocol
License-free use
69 selectable RF channels
Low power consumption
4 Relay outputs NO/NC with failsafe
Relay status LEDs
Relay override buttons
6 Digital inputs configurable for status, alarm and pulse meter
Digital input status LEDs
2 Thermistor/light sensor inputs
Signal test/discovery button
DIN rail mount
Compliance
EMC EN 55022: 2006
EN 61000-4-3: 2006
EN 61000-4-2: 2001
EN 61000-4-4: 2004
EN 61000-4-5: 2006
EN 61000-4-6: 2005
EN 61000-4-11: 2004
EN 61000-3-3: 1995
Safety EN 60950: Information technology equipment
EN 60730: Automatic electrical controls
EN 50366: Domestic equipment
Wireless EU R&TTE directive for 25kHz
EN 300 220: EMC standard for short range devices
EN 301 489: EMC standard for radio equipment and services

Specifications
Operating Temperature Range -10 to +50 DegC
Operating Humidity < 75% RH (Non condensating)
Storage Temperature -20 to +85 DegC
Storage Humidity < 90% RH (Non condensating)
Cooling Convection
   
Supply Voltage 12VDC regulated (+/- 0.5V)
Current Consumption 300mA (3.6W) max
Ripple/Noise 50mV p-p max
   
Relay Contact Ratings 5A max @ 240VAC (Resistive / Inductive load)
5A max @ 30VDC (Resistive / Inductive load)
Relay Mechanical Life Expectancy 10,000,000 operations min
Relay Electrical Life Expectancy 100,000 operations min
   
Thermistor Inputs 10KΩ Thermistor 10K3A1 (Resistive)
   
Digital Inputs 'Volt free' (Internal 12VDC supply) or
Opto Isolated, 50VDC max, threshold level ~5.5V
   
Antenna Connector Female 50Ω SMA (SubMiniature version A)
   
RF Frequency 433.05–434.79MHz
RF Output 8dBm max
RF Sensitivity -115dBm
RF Bandwidth 25kHz (Narrow band)
RF Channels 69
   
Weight 223g (without antenna)
Enclosure UL94-VO flame retardant PC, IP20 rated
Terminal Covers UL94-VO, IP20 finger protection
Mounting 35mm DIN rail (EN 50022, BS 5584, DIN 46277-3) or direct surface mount.
Optional adaptor for G rail mounting
Dimensions W 90mm x H 58mm x D 88mm

WEMS User Guide version 4.0 20150130.
This guide relates to features up to and including 1.18.0.3